Ini File Parameters; Snmp Parameters - AudioCodes Mediant 4000 SBC User Manual

CHAPTER 60 Configuration Parameters Reference
Parameter
configure system >
mgmt-auth > obscure-
password-mode
[CliObscuredPassword]

ini File Parameters

The parameters relating to ini-file management are described in the table below.
Parameter
[INIPasswordsDisplayType]

SNMP Parameters

The SNMP parameters are described in the table below.
'Disable SNMP'
configure system > snmp settings
> disable
[DisableSNMP]
Note: You can override this parameter for a specific CLI
session and configure a different number of output lines, by
using the window-height CLI command in the currently
active CLI session.
Enables the device to enforce obscured (i.e., encrypted)
passwords whenever you create a new management user
or modify the password of an existing user, through CLI
(configure system > user) .
■ [0] = (Default) Disabled - passwords are configured in
plain text.
■ [1] = Enabled - passwords must be configured in
encrypted format. To obtain an encrypted (obscured)
password:
a.
b.
c.
d.
Table 60-4: ini File Parameters
Defines how passwords are displayed in the ini file.
■ [0] = (default) Disable. Passwords are obscured
("encoded"). The passwords are displayed in the following
syntax: $1$<obscured password> (e.g., $1$S3p+fno=).
■ [1] = Enable. All passwords are hidden and replaced by an
asterisk (*).
Table 60-5: SNMP Parameters
Parameter
- 868 -
Mediant 4000 SBC | User's Manual
Description
Enable the parameter.
Configure the user's password in the Web inter-
face's Local Users table (see
agement User Accounts
Save the device's CLI Script file to your local PC
(see Saving and Loading CLI Script Files
page 689).
Open the file, and then copy the encrypted pass-
word to the CLI where you are configuring the user.
Description
Description
Enables and disables SNMP.
■ [0] No = (Default) SNMP is enabled.
■ [1] Yes = SNMP is disabled.
Configuring Man-
on page 41).
on