AudioCodes Mediant 4000 SBC User Manual page 340

CHAPTER 17 Quality of Experience
8. Click New, and then save your settings to flash memory.
Table 17-4: Quality of Experience Color Rules Table Parameter Descriptions
Parameter
General
'Index'
index
[QOEColorRules_
ColorRuleIndex]
'Monitored Parameter'
monitored-
parameter
[QOEColorRules_
monitoredParam]
'Direction'
direction
[QOEColorRules_
direction]
'Sensitivity Level'
sensitivity-level
[QOEColorRules_
profile]
Thresholds
'Minor Threshold
(Yellow)'
minor-threshold-
yellow
[QOEColorRules_
MinorThreshold]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines the parameter to monitor and report.
■ [0] MOS (default)
■ [1] Delay
■ [2] Packet Loss
■ [3] Jitter
■ [4] RERL [Echo]
Defines the monitoring direction.
■ [0] Device Side (default)
■ [1] Remote Side
Defines the sensitivity level of the thresholds.
■ [0] User Defined = Need to define the thresholds in the
parameters described below.
■ [1] Low = Pre-configured low sensitivity threshold values.
Thus, reporting is done only if changes in parameters' values
are significant.
■ [2] Medium = (Default) Pre-configured medium sensitivity
threshold values.
■ [3] High = Pre-configured high sensitivity threshold values.
Thus, reporting is done for small fluctuations in parameter
values.
Defines the Minor threshold value, which is the lower threshold
located between the Yellow and Green states. To consider a
threshold crossing:
■ Increase in severity (i.e., Green to Yellow): Only this value
is used.
■ Decrease in severity (Red to Green, or Yellow to Green):
This value is used with the hysteresis, configured by the 'Minor
Hysteresis (Yellow)' parameter (see below).
The valid threshold values are as follows:
■ MOS values are in multiples of 10. For example, to denote a
MOS of 3.2, the value 32 (i.e., 3.2*10) must be entered.
■ Delay values are in msec.
■ Packet Loss values are in percentage (%).
■ Jitter is in msec.
- 307 -
Mediant 4000 SBC | User's Manual
Description