AudioCodes Mediant 4000 SBC User Manual page 913
Session border controllers
Hide thumbs
Also See for Mediant 4000 SBC:
- User manual (964 pages) ,
- Hardware installation manual (40 pages) ,
- User manual (930 pages)
Table of Contents
Advertisement
CHAPTER 60 Configuration Parameters Reference
Parameter
voice-configuration
[IniFileURL]
cli-script <URL>
[CliScriptURL]
startup-script <URL>
[CLIStartupScriptUrl]
■
For the parameter to take effect, a device reset is required.
■
When the parameter is configured, the device always
loads the cmp file after it is reset.
■
The cmp file is validated before it's burned to flash. The
checksum of the cmp file is also compared to the
previously burnt checksum to avoid unnecessary resets.
■
The maximum length of the URL address is 255
characters.
Defines the name of the ini file and the URL address (IP
address or FQDN) of the server where the file is located.
Optionally, the username and password
('https://username:password@10.1.1.1/<file name>') for
access authentication with the server can also be configured.
For example:
'http://192.168.0.1/filename'
'http://192.8.77.13/config_<MAC>.ini'
'https://<username>:<password>@<IP
address>/<filename>'
Note:
■
For the parameter to take effect, a device reset is required.
■
When using HTTP or HTTPS, the date and time of the ini
file are validated. Only more recently dated ini files are
loaded.
■
MAC Address Placeholder in Configuration File
This option allows the loading of specific configurations for
specific devices.
■
The maximum length of the URL address is 99 characters.
Defines the URL of the server where the CLI Script file
containing the device's configuration is located. This file is
used for automatic provisioning. Optionally, the username and
password ('https://username:password@10.1.1.1/<file
name>') for access authentication with the server can also be
configured.
Note: The case-sensitive string, "<MAC>" can be used in the
filename, which is automatically replaced with the device's
MAC address. For more information, see
Placeholder in Configuration File
Defines the URL address of the server where the CLI Startup
Script file containing the device's configuration is located.
This file is used for automatic provisioning. Optionally, the
username and password
('https://username:password@10.1.1.1/<file name>') for
access authentication with the server can also be configured.
Note:
- 880 -
Mediant 4000 SBC | User's Manual
Description
MAC Address
Name.
Name.
Advertisement
Table of Contents
Troubleshooting
