Debugging Web Services - AudioCodes Mediant 4000 SBC User Manual

CHAPTER 54 Debugging Web Services
54

Debugging Web Services

If you have configured remote Web services (see
debugging of the remote HTTP clients. You can configure the debug level from 1 to 3, where 3 is the
most detailed. The debug messages are sent to the Syslog server.
➢
To configure debugging of Web services:
1. Open the Web Service Settings page (Setup menu > IP Network tab > Web Services folder >
Web Service Settings).
2. In the 'Debug Level' field (RestDebugMode), enter the debug level (or disable debugging by
configuring it to 0):
3. Click Apply.
Remote Web Services
- 835 -
Mediant 4000 SBC | User's Manual
), you can enable