CHAPTER 51 Reporting Information to External Party
Field
Termination
Side
[409]
Transport
Type
[421]
Trigger
[439]
■
The field is included in the default CDR.
■
The field is mainly relevant to RADIUS CDRs, but can also be used in
Syslog and Local Storage.
■
The default field title is "terminator=" (e.g., "terminator=yes").
■
The maximum number of characters for Syslog tabular alignment is 5.
Displays the party that terminated the call. The field value is a string:
■
"LCL": SBC Outgoing leg or Tel side.
■
"RMT": SBC Incoming leg or IP side.
■
"UNKN": Unknown
For example, if the Orig field is "RMT" and this Termination Side field is "LCL",
then the called party ended the call.
Note:
■
The field is included in the default CDR.
■
The field is applicable only to "CALL_END" CDR Report Types.
■
The field is applicable only to SBC signaling and Gateway CDRs.
■
The default field title is "TrmSd".
■
The maximum number of characters for Syslog tabular alignment is 5.
Displays the SIP signaling transport type protocol. The field value is a string:
■
"UDP"
■
"TCP"
■
"TLS"
Note:
■
The field is included in the default CDR.
■
The field is applicable to all CDR Report Types.
■
The field is applicable only to SBC signaling and Gateway CDRs.
■
The default field title is "SigTransportType" for Gateway Syslog and Local
Storage, and "TransportType" for SBC Syslog and Local Storage.
■
The maximum number of characters for Syslog tabular alignment is 16.
Displays the reason for the call (i.e., what triggered it):
■
"Normal": regular call
■
"Refer": call transfer
■
"AltRoute": alternative routing
■
"Forward": call forward
■
"Reroute": When a broken connection on the outgoing leg occurs, the call is
rerouted to another destination according to the IP-to-IP Routing table
(where matching characteristics includes the trigger for reroute).
Note:
■
The field is included in the default CDR.
■
The field is applicable to all CDR Report Types.
■
The field is applicable only to SBC signaling and Gateway CDRs.
■
The default field title is "Trigger".
■
The maximum number of characters for Syslog tabular alignment is 8.
- 798 -
Mediant 4000 SBC | User's Manual
Description