AudioCodes Mediant 4000 SBC User Manual page 343

CHAPTER 17 Quality of Experience
Table 17-5: Threshold Crossings based on Threshold and Hysteresis
Threshold
Crossing
Green to
Yellow (Minor
alarm)
Green to Red
(Major alarm)
Yellow to Red
(Major alarm)
Red to Yellow
(Minor alarm)
Yellow to
Green (alarm
cleared)
Red to Green
(alarm cleared)
The following procedure describes how to configure Bandwidth Profiles through the Web interface.
You can also configure it through ini file [BWProfile] or CLI (configure voip > qoe bw-
profile).
➢
To configure a Bandwidth Profile:
1. Open the Bandwidth Profile table (Setup menu > Signaling & Media tab > Media folder >
Quality of Experience > Bandwidth Profile).
2. Click New; the following dialog box appears:
Calculation
The change occurs if the current bandwidth crosses the
configured Minor threshold only (i.e., hysteresis is not
used).
The change occurs if the current bandwidth crosses the
configured Major threshold only (i.e., hysteresis is not
used).
The change occurs if the current bandwidth crosses the
configured Major threshold only (i.e., hysteresis is not
used).
The change occurs if the current bandwidth crosses the
configured Major threshold with hysteresis.
The change occurs if the current bandwidth crosses the
configured Minor threshold with hysteresis.
The change occurs if the current bandwidth crosses the
configured Minor threshold with hysteresis.
- 310 -
Mediant 4000 SBC | User's Manual
Threshold
based on
Example
32,000 Kbps
64,000 Kbps
64,000 Kbps
57,600 Kbps
[64,000 - (10% x
64,000)]
25,600 Kbps
[32,000 - (10% x
64,000)]
25,600 Kbps
[32,000 - (10% x
64,000)]