Configuring Sbc User Information Table Through Cli - AudioCodes Mediant 4000 SBC User Manual

CHAPTER 20 SIP Definitions
Parameter

Configuring SBC User Information Table through CLI

The SBC User Information table can be configured in the CLI using the following commands:
■ To add and/or modify a user (example):
# configure voip
(config-voip)# sip-definition proxy-and-registration
(sip-def-proxy-and-reg)# user-info sbc-user-info <index, e.g., 1>
(sbc-user-info-1)# username JohnDee
(sbc-user-info-1)# <activate | exit>
■ To delete a specific user, use the no command:
(sip-def-proxy-and-reg)# no user-info sbc-user-info <index, e.g., 1>
■ To import users from a file:
# configure voip
(config-voip)# sip-definition proxy-and-registration
(sip-def-proxy-and-reg)# user-info sbc-user-info import-csv-from <URL>
■ To export users to a .csv file:
# configure voip
(config-voip)# sip-definition proxy-and-registration
(sip-def-proxy-and-reg)# user-info sbc-user-info export-csv-to <URL>
■ To view all table entries:
(sip-def-proxy-and-reg)# user-info sbc-user-info display
---- sbc-user-info-0 ----
local-user (JohnDee)
username (userJohn)
password (s3fn+fn=)
ip-group-id (1)
status (not-resgistered)
---- sbc-user-info-1 ----
local-user (SuePark)
username (userSue)
password (t6sn+un=)
ip-group-id (1)
status (not-resgistered)
■ To view a specific entry (example):
■ "N/A": Invalid configuration as the user has not been assigned an
IP Group.
■ "NA": Invalid configuration as the user has been assigned a
Server-type IP Group instead of a User-type IP Group.
- 450 -
Mediant 4000 SBC | User's Manual
Description