AudioCodes Mediant 4000 SBC User Manual page 313

CHAPTER 16 Services
Parameter
'Device Login TLS Context'
device-login-tls-
context
[OVOCService_
LoginInterfaceTLSContext]
'Device Login Interface
Verify Certificate'
device-interface-
verify-cert
[OVOCService_
LoginInterfaceVerifyCert]
OVOC
'OVOC Listening Interface'
ovoc-interface
[OVOCService_
EMSListeningInterface]
'OVOC Listening Port'
ovoc-port
[OVOCService_
EMSListeningPort]
'OVOC Scheme'
ovoc-scheme
[OVOCService_
EMSScheme]
Note: If configured to HTTPS, you must assign a TLS Context
(see the 'Device Login TLS Context' parameter, below).
Assigns a TLS Context (TLS certificate) for the interface with
the requesting client. This is required if you have configured the
'Device Scheme' parameter to HTTPS (see above). To
configure TLS Contexts, see
Contexts on page 124.
Note: The NGINX directive for this parameter is "proxy_ssl_
certificate", "proxy_ssl_certificate_key", "proxy_ssl_ciphers",
and "proxy_ssl_protocols".
Enables the verification of the TLS certificate that is used in the
incoming client connection request.
■ [0] No = (Default) No certificate verification is done.
■ [1] Yes = The device verifies the authentication of the
certificate received from the client. The device authenticates
the certificate against the trusted root certificate store
associated with the assigned TLS Context (see 'Device
Login TLS Context' parameter above) and if ok, allows
communication with the client. If authentication fails, the
device denies communication (i.e., handshake fails). The
device can also authenticate the certificate by querying with
an Online Certificate Status Protocol (OCSP) server
whether the certificate has been revoked. This is also
configured for the associated TLS Context.
Note: The NGINX directive for this parameter is "proxy_ssl_
verify".
Assigns an IP network interface (local, listening HTTP
interface:port) for communication with OVOC. To configure IP
Interfaces, see Configuring IP Network Interfaces
By default, no value is defined.
Note:
■ The parameter is mandatory.
■ The NGINX directive for this parameter is "proxy_bind".
Defines the listening port for the OVOC interface.
Note: The NGINX directive for this parameter is "proxy_bind".
Defines the security scheme for the connection with OVOC.
■ [0] HTTP (default)
■ [1] HTTPS
Note:
■ If configured to HTTPS, you must assign a TLS Context
(see the 'OVOC Interface TLS Context' parameter, below).
- 280 -
Mediant 4000 SBC | User's Manual
Description
Configuring TLS Certificate
on page 96.