AudioCodes Mediant 4000 SBC User Manual page 149

CHAPTER 13 Network
Application
T.38 traffic
SIP
SIP over TLS (SIPS)
Syslog
SNMP Traps
DNS client
NTP
➢
To configure DiffServ (Layer-3 QoS) values per CoS:
1. Open the QoS Settings page (Setup menu > IP Network tab > Quality folder > QoS
Settings).
2. Click New; the following dialog box appears:
3. Configure DiffServ values per CoS according to the parameters described in the table below.
4. Click Apply, and then save your settings to flash memory.
'Media Premium QoS'
media-qos
[PremiumServiceClassMediaDiffServ]
Media
Control
Control
Management
Management
Varies according to DNS settings:
■ OAMP
■ Control
Varies according to the interface type
associated with NTP (see Assigning NTP
Services to Application Types):
■ OAMP
■ Control
Table 13-9: QoS Settings Parameter Descriptions
Parameter
Traffic / Network Types
Description
Defines the DiffServ value for Premium Media CoS
content.
The valid range is 0 to 63. The default is 46.
- 116 -
Mediant 4000 SBC | User's Manual
Class-of-Service
(Priority)
Media Premium
Control Premium
Control Premium
Bronze
Bronze
Depends on
traffic type:
■ Control:
Control
Premium
■ Management:
Bronze
Depends on
traffic type:
■ Control:
Control
Premium
■ Management:
Bronze