AudioCodes Mediant 4000 SBC User Manual page 415

CHAPTER 18 Core Entities
Item #
4
■
■
■
1.
2.
■
■
■
Configured IP Groups. Each IP Group is displayed using the following "IP Group
[Server]" or "IP Group [User]" titled icon (depending on whether it's a Server- or
User-type IP Group respectively), which includes the name and row index number
(example of a Server-type):
If you hover your mouse over the icon, a pop-up appears displaying the following
basic information (example):
If you click the icon, a drop-down menu appears listing the following commands:
Edit: Opens a dialog box in the IP Groups table to modify the IP Group.
Show List: Opens the IP Groups table.
Delete: Opens the IP Groups table where you are prompted to confirm deletion
of the IP Group.
To add an IP Group, do the following:
Click the Add IP Group
Groups, or as
or as
The IP Groups table opens with a new dialog box for adding a IP Group to the
next available index row.
Configure the IP Group as desired, and then click Apply; the IP Groups table
closes and you are returned to the Topology View, displaying the new IP Group.
For more information on configuring IP Groups, see
IP Group icons also display connectivity status with Server-type IP Groups:
(Green with check mark): Keep-alive is successful and
connectivity exists with IP Group.
(Red with "x"): Keep-alive has failed and there is a loss of
connectivity with the IP Group.
The line type connecting between an IP Group and a SIP Interface indicates whether
a routing rule has been configured for the IP Group. A solid line indicates that you
have configured a routing rule for the IP Group; a dashed line indicates that you have
yet to configure a routing rule.
Note:
You can also view connectivity status in the IP Groups table.
Description
plus icon. The icon appears next to existing IP
when no IP Groups exist on a topology border,
when there are no IP Groups at all.
Configuring IP
- 382 -
Mediant 4000 SBC | User's Manual
Groups.