AudioCodes Mediant 4000 SBC User Manual page 467

Session border controllers

Hide thumbs Also See for Mediant 4000 SBC:

Table of Contents

CHAPTER 19 Coders and Profiles

Mediant 4000 SBC | User's Manual

To play user-defined tones, you need to record your tones

and then install them on the device using a loadable

Prerecorded Tones (PRT) file, which is created using

AudioCodes DConvert utility. When you create the PRT

file, each recorded tone file must be added to the PRT file

with the tone type "acUserDefineTone<Index>". When you

want to specify the held tone for this parameter, use the

index number. For more information, see

Troubleshooting