AudioCodes Mediant 4000 SBC User Manual page 348

CHAPTER 17 Quality of Experience
Parameter
Action
'Rule Action'
rule-action
[QualityOfServiceRules_
RuleAction]
'Calls Reject Duration'
calls-reject-
duration
[QualityOfServiceRules_
CallsRejectDuration]
'Alternative IP Profile
Name'
alt-ip-profile-
name
[QualityOfServiceRules_
AltIPProfileName]
Defines the action to be done if the rule is matched.
■ [0] Reject Calls = (Default) New calls destined to the
specified IP Group are rejected for a user-defined duration. To
configure the duration, use the 'Calls Reject Duration'
parameter (see below).
■ [1] Alternative IP Profile = A different IP Profile is used for
the IP Group or call (depending on the 'Rule Metric'
parameter). To specify the IP Profile, use the 'Alternative IP
Profile Name' parameter (see below).
Note:
■ If you configure the 'Rule Metric' parameter to ACD, ASR or
NER, you must configure the parameter to Reject Calls.
■ If you configure the 'Rule Metric' parameter to Voice Quality
or Bandwidth:
✔
If you configure the 'Severity' parameter to Minor, you
must configure the parameter to Alternative IP Profile.
✔
If you configure the 'Severity' parameter to Major, you
can configure the parameter to any option.
When configured to Alternative IP Profile and the threshold
is crossed, the device changes the IP Profile for the entire IP
Group for all new calls.
■ If you configure the 'Rule Metric' parameter to Poor InVoice
Quality, you must configure the parameter to Alternative IP
Profile. If the threshold is crossed (i.e., poor call quality), the
device changes the IP Profile for the specific call only (during
the call).
Defines the duration (in minutes) for which the device rejects calls
to the IP Group if the rule is matched.
The default is 5.
Note: The parameter is applicable only if the 'Rule Action'
parameter is configured to Reject Calls.
Assigns a different IP Profile to the IP Group or call (depending on
the 'Rule Metric' parameter) if the rule is matched.
By default, no value is defined.
Note: The parameter is applicable only if the 'Rule Action'
parameter is configured to Alternative IP Profile.
- 315 -
Mediant 4000 SBC | User's Manual
Description