AudioCodes Mediant 4000 SBC User Manual page 218

CHAPTER 16 Services
DHCP Option Code
Option 42
Option 2
Option 66
Option 67
Option 120
Once you have configured the DHCP server, you can configure the following:
■ DHCP Vendor Class Identifier names (DHCP Option 60) - see
Identifier
■ Additional DHCP Options - see
■ Static IP addresses for DHCP clients - see
If you configure additional DHCP Options in the DHCP Option table, they override the
default ones, which are configured in the DHCP Servers table. For example, if you
configure Option 67 in the DHCP Option table, the device uses the value configured in
the DHCP Option table instead of the value configured in the DHCP Servers table.
To view and delete currently serviced DHCP clients, see
The following procedure describes how to configure the DHCP server through the Web interface.
You can also configure it through ini file [DhcpServer] or CLI (configure network > dhcp-
server server <index>).
➢
To configure the device's DHCP server:
1. Open the DHCP Servers page (Setup menu > IP Network tab > Advanced folder > DHCP
Severs).
2. Click New; the following dialog box appears:
DHCP Option Name
Network Time Protocol Server
Time Offset
TFTP Server Name
Boot file Name
SIP Server
Configuring Additional DHCP Options
Configuring Static IP Addresses for DHCP Clients
Viewing and Deleting DHCP
- 185 -
Mediant 4000 SBC | User's Manual
Configuring the Vendor Class
Clients.