AudioCodes Mediant 4000 SBC User Manual page 77

CHAPTER 6 Web-Based Management
Parameter
'User Level'
privilege
[WebUsers_UserLevel]
'SSH Public Key'
public-key
[WebUsers_
SSHPublicKey]
'Status'
status
[WebUsers_Status]
■ For security, password characters are not shown in the Web
interface and ini file. In the Web interface, they are displayed
as dots when you enter the password and then once applied,
the password is displayed as an asterisk (*) in the table. In the
ini file, they are displayed as an encrypted string.
■ To enforce obscured (encrypted) passwords when configuring
the Local Users table through the CLI, see the
[CliObscuredPassword] parameter.
Defines the user's access level.
■ Monitor = (Default) Read-only user. This user can only view
Web pages and access to security-related pages is denied.
■ Administrator = Read/write privileges for all pages except
security-related pages including the Local Users table where
this user has read-only privileges.
■ Security Administrator = Full read/write privileges for all
pages.
■ Master = Read/write privileges for all pages. This user also
functions as a security administrator.
Note:
■ At least one Security Administrator must exist. You cannot
delete the last remaining Security Administrator.
■ The first Master user can be added only by a Security
Administrator user.
■ Additional Master users can be added, edited and deleted only
by Master users.
■ If only one Master user exists, it can be deleted only by itself.
■ Master users can add, edit, and delete Security Administrators
(except the last Security Administrator).
■ Only Security Administrator and Master users can add, edit,
and delete Administrator and Monitor users.
Defines a Secure Socket Shell (SSH) public key for RSA public-
key authentication (PKI) of the remote user when logging into the
device's CLI through SSH. Connection to the CLI is established
only when a successful handshake with the user's private key
occurs.
The valid value is a string of up to 512 characters. By default, no
value is defined.
Note:
■ For more information on SSH and for enabling SSH, see
Enabling SSH with RSA Public Key for
■ To configure whether SSH public keys are optional or
mandatory, use the SSHRequirePublicKey parameter.
Defines the status of the user.
■ New = (Default) User is required to change its password on
the next login. When the user logs in to the Web interface, the
user is immediately prompted to change the current password.
- 44 -
Mediant 4000 SBC | User's Manual
Description
CLI.