AudioCodes Mediant 4000 SBC User Manual page 254

CHAPTER 16 Services
'LDAP Network Interface'
interface-type
[LdapConfiguration_Interface]
'Use TLS'
use-tls
[LdapConfiguration_useTLS]
'TLS Context'
tls-context
[LdapConfiguration_ContextName]
Connection
'LDAP Server IP'
server-ip
[LdapConfiguration_
LdapConfServerIp]
'LDAP Server Port'
server-port
[LdapConfiguration_
LdapConfServerPort]
'LDAP Server Max Respond Time'
max-respond-time
[LdapConfiguration_
LdapConfServerMaxRespondTim
e]
Parameter Description
Assigns one of the device's IP network interfaces
through which communication with the LDAP server is
done.
By default, no value is defined and the device uses the
OAMP network interface, configured in the IP Interfaces
table.
To configure IP network interfaces, see
Network Interfaces.
Note: The parameter is mandatory.
Enables the device to encrypt the username and
password (for Control and Management related queries)
using TLS when sending them to the LDAP server.
■ [0] No = (Default) Username and password are sent
in clear-text format.
■ [1] Yes
Assigns a TLS Context for the connection with the
LDAP server.
By default, no value is defined and the device uses the
default TLS Context (ID 0).
To configure TLS Contexts, see
Certificate Contexts.
Note: The parameter is applicable only if the 'Use TLS'
parameter is configured to Yes.
Defines the IP address of the LDAP server (in dotted-
decimal notation, e.g., 192.10.1.255).
By default, no IP address is defined.
Note:
■ The parameter is mandatory.
■ If you want to use an FQDN for the LDAP server,
leave the parameter undefined and configure the
FQDN in the 'LDAP Server Domain Name'
parameter (see below).
Defines the port number of the LDAP server.
The valid value range is 0 to 65535. The default port
number is 389.
Defines the duration (in msec) that the device waits for
LDAP server responses.
The valid value range is 0 to 86400. The default is 3000.
- 221 -
Mediant 4000 SBC | User's Manual
Configuring IP
Configuring TLS