AudioCodes Mediant 4000 SBC User Manual page 425

CHAPTER 19 Coders and Profiles
7. Configure coders for the Allowed Audio Coders Group according to the parameters described in
the table below.
8. Click Apply.
Table 19-3: Allowed Audio Coders Groups and Allowed Audio Coders Tables Parameter Descriptions
Allowed Audio Coders Groups Table
'Index'
allowed-audio-coders-
groups <index>
[AllowedAudioCodersGroups_
Index]
'Name'
coders-group-name
[AllowedAudioCodersGroups_
Name]
Allowed Audio Coders Table
'Index'
allowed-audio-coders
<group index/coder index>
[AllowedAudioCoders_
AllowedAudioCodersIndex]
'Coder'
coder
[AllowedAudioCoders_CoderID]
'User-defined Coder'
user-define-coder
[AllowedAudioCoders_
UserDefineCoder]
Parameter Description
Defines an index number for the new table row.
Note: Each row must be configured with a unique
index.
Defines a descriptive name, which is used when
associating the row in other tables.
The valid value is a string of up to 40 characters.
Note:
■ Each row must be configured with a unique name.
■ The parameter value cannot contain a forward slash
(/).
Defines an index number for the new table row.
Note: Each row must be configured with a unique
index.
Selects a coder from the list of coders.
Note: Each coder can be configured only once per
Allowed Audio Coders Group.
Defines a user-defined coder.
The valid value is a string of up to 24 characters (case-
insensitive). For example, "HD.123" (without quotes).
Note: Each coder can be configured only once per
Allowed Audio Coders Group.
- 392 -
Mediant 4000 SBC | User's Manual