AudioCodes Mediant 4000 SBC User Manual page 282

CHAPTER 16 Services
Parameter
[HTTPRemoteServices_
HTTPType]
'Path'
rest-path
[HTTPRemoteServices_Path]
Policy
'Policy in Group'
http-policy
[HTTPRemoteServices_
Policy]
■ [0] Routing = (Default) Routing service (also includes
Call Status and Topology Status).
■ [1] Call Status = Call status service.
■ [2] Topology Status = Topology status service (e.g.,
change in configuration).
■ [5] QoS = QoS-based call routing. For more information,
see Configuring QoS-Based Routing by Routing
■ [8] General = This service type can be used for the
following services:
✔
Generating and sending CDRs to a REST server
through REST API.
✔
Querying (GET) HTTP servers using Call Setup
Rules.
Note:
■ You can configure only one remote Web service for each
of the following service types: Routing, Call Status,
and Topology Status, and QoS.
■ For the Topology Status option to be functional, you
must enable the functionality (see
Status Services).
■ The Routing option also includes the Call Status and
Topology Status services.
■ If you do no configure the parameter to QoS, the device
sends QoS reports to the Topology server.
Defines the path (prefix) to the REST APIs.
The valid value is a string of up to 80 characters. The default
is "api".
Defines the mode of operation between hosts in a group,
which are configured in the HTTP Remote Hosts table for
the specific remote Web service.
■ [0] Round Robin = (Default) The device does load
balancing of traffic across all the hosts in the group.
Every consecutive message is sent to the next available
host. The priority of the hosts determines the order in
which the device sends the traffic.
■ [1] Sticky Primary = The device always attempts to
send traffic to the host that has the highest priority in the
group. If the host does not respond, the device sends the
traffic to the next available host that has the highest
priority. If the host that has the highest priority becomes
available again, the device sends the traffic to this host.
- 249 -
Mediant 4000 SBC | User's Manual
Description
Enabling Topology
Server.