AudioCodes Mediant 4000 SBC User Manual page 273

CHAPTER 16 Services
b. Configure the LDAP attribute names as desired.
3. SBC application: Configure AD-based IP-to-IP routing rules:
a. Open the IP-to-IP Routing table (see
b. Configure query-result routing rules for each IP domain (private, PBX / IP PBX, Skype for
Business clients, and mobile), using the LDAP keywords (case-sensitive) in the
'Destination Username Pattern' field:
◆
◆
◆
◆
◆
c. Configure a routing rule for routing the initial call (LDAP query) to the LDAP server, by
setting the 'Destination Type' field to LDAP for denoting the IP address of the LDAP
server.
d. For alternative routing, enable the alternative routing mechanism and configure
corresponding SIP reasons for alternative routing. For this feature, alternative routing
starts from the table row located under the LDAP query row.
The table below shows an example for configuring AD-based SBC routing rules in the IP-to-IP
Routing Table:
Table 16-14:AD-Based SBC IP-to-IP Routing Rule Configuration Examples
Index Destination Username Pattern
1 PRIVATE:
2 PBX:
3 OCS:
4 MOBILE:
5 LDAP_ERR
6 *
7 *
The configured routing rule example is explained below:
PRIVATE: Private number
OCS: Skype for Business client number
PBX: PBX / IP PBX number
MOBILE: Mobile number
LDAP_ERR: LDAP query failure
Configuring SBC IP-to-IP Routing
Destination Type
Dest Address
Dest Address
Dest Address
Dest Address
Dest Address
LDAP
Dest Address
- 240 -
Mediant 4000 SBC | User's Manual
Rules).
Destination Address
10.33.45.60
10.33.45.65
10.33.45.68
10.33.45.100
10.33.45.80
-
10.33.45.72