AudioCodes Mediant 4000 SBC User Manual page 284

CHAPTER 16 Services
Parameter
Authentication
'Username'
rest-user-name
[HTTPRemoteServices_
AuthUserName]
'Password'
rest-password
[HTTPRemoteServices_
AuthPassword]
Security
'TLS Context'
rest-tls-context
[HTTPRemoteServices_
TLSContext]
'Verify Certificate'
rest-verify-
certificates
[HTTPRemoteServices_
VerifyCertificate]
'Verify Certificate Subject
Name'
verify-cert-subject-
name
[HTTPRemoteServices_
VerifyCertificateSubjectName]
■ [1] Enable (default)
Note: The parameter is applicable only if you configure the
'Type' parameter to any value except General.
Defines the username for HTTP authentication.
The valid value is a string of up to 80 characters. The default
is "user".
Defines the password for HTTP authentication.
The valid value is a string of up to 80 characters. The default
is "password".
Assigns a TLS Context for connection with the remote host.
By default, no value is defined.
To configure TLS Contexts, see
Contexts.
Note: The parameter is applicable only if the connection is
HTTPS.
Enables certificate verification when connection with the
host is based on HTTPS.
■ [0] Disable = (Default) No certificate verification is done.
■ [1] Enable = The device verifies the authentication of the
certificate received from the HTTPS peer. The device
authenticates the certificate against the trusted root
certificate store associated with the associated TLS
Context (see 'TLS Context' parameter above) and if ok,
allows communication with the HTTPS peer. If
authentication fails, the device denies communication
(i.e., handshake fails). The device can also authenticate
the certificate by querying with an Online Certificate
Status Protocol (OCSP) server whether the certificate
has been revoked. This is also configured for the
associated TLS Context.
Note: The parameter is applicable only if the connection is
HTTPS.
Enables the verification of the TLS certificate subject name
(Common Name / CN or Subject Alternative Name / SAN)
when connection with the host is based on HTTPS.
■ [0] Off = (Default) No verification is done.
- 251 -
Mediant 4000 SBC | User's Manual
Description
Configuring TLS Certificate