AudioCodes Mediant 4000 SBC User Manual page 848

CHAPTER 52 Syslog and Debug Recording
Parameter
[LoggingFilters_
LogDestination]
'Log Type'
log-type
[LoggingFilters_
CaptureType]
■ [0] Syslog Server = The device generates Syslog messages
based on the configured log filter and sends them to a user-
defined Syslog server. The Syslog messages can contain one
of the following types of information, depending on the settings
of the 'Log Type' parameter (described later):
✔
Not configured (default): Syslog messages include
regular syslog information.
✔
CDR Only: Syslog messages include only CDRs (no
system information and alerts).
■ [1] Debug Recording Server = (Default) The device generates
debug recording packets based on the configured log filter and
sends them to a user-defined Debug Recording server.
■ [2] Local Storage = The device generates CDRs based on the
configured log filter and stores them locally on the device. For
more information on local CDR storage, see
the Device
■ [3] Call Flow Server = The device sends SIP messages to a
call flow server (i.e., OVOC) for displaying SIP call dialog
sessions as SIP call flow diagrams. For this functionality, you
also need to configure the 'Log Type' parameter to Call Flow.
For enabling this functionality, see
Diagrams in OVOC
Note:
■ If the 'Filter Type' parameter is configured to IP Trace, you must
configure the parameter to Debug Recording Server.
■ If you configure the parameter to Local Storage, you must
configure the 'Log Type' parameter to CDR Only.
■ If you configure the parameter to Syslog Server and the debug
level, using the [GwDebugLevel] parameter, is configured to No
Debug (see Configuring Syslog Debug
messages include only system Warnings and Errors.
■ If you configure the parameter to Debug Recording Server,
you can also include Syslog messages in the debug recording
packets sent to the debug recording server. To include Syslog
messages, configure the 'Log Type' parameter (see below) to
the relevant option.
Defines the type of messages to include in the log file.
■ [0] = (Default) Not configured. The option is applicable only for
sending Syslog messages to a Syslog server (i.e., 'Log
Destination' parameter is configured to Syslog Server).
■ [1] Signaling = The option is applicable only to debug recording
(i.e., 'Log Destination' parameter is configured to Debug
Recording Server). The debug recording includes signaling
information such as SIP signaling messages, Syslog
messages, CDRs, and the device's internal processing
messages.
- 815 -
Mediant 4000 SBC | User's Manual
Description
Enabling SIP Call Flow
on page 836.
Level), the Syslog
Storing CDRs on