AudioCodes Mediant 4000 SBC User Manual page 1000

CHAPTER 60 Configuration Parameters Reference
'SBC Max Call Duration'
configure voip > sbc settings >
sbc-mx-call-duration
[SBCMaxCallDuration]
'SBC No Answer Timeout'
configure voip > sbc settings >
sbc-no-arelt-timeout
[SBCAlertTimeout]
configure voip > sbc settings >
num-of-subscribes
[NumOfSubscribes]
Parameter
- 967 -
Mediant 4000 SBC | User's Manual
Description
✔
The source SRD is determined
according to the SIP Interface to
where the SIP-initiating dialog
request is sent. The source IP
Group is set to the default IP Group
associated with this SRD.
✔
If the source SRD is ID 0, then
source IP Group ID 0 is chosen. In
case of any other SRD, then the
first IP Group associated with this
SRD is chosen as the source IP
Group or the call. If no IP Group is
associated with this SRD, the call
is rejected.
Defines the maximum duration (in minutes)
per SBC call (global). If the duration is
reached, the device terminates the call.
The valid range is 0 to 35,791, where 0 is
unlimited duration. The default is 0.
Note: You can also configure this feature
per specific calls, using IP Profiles
(IpProfile_SBCMaxCallDuration). For a
detailed description of the parameter and for
configuring this feature in the IP Profiles
table, see Configuring IP
feature is configured for a specific IP
Profile, the settings of this global parameter
is ignored for calls associated with the IP
Profile.
Defines the timeout (in seconds) for SBC
outgoing (outbound IP routing) SIP INVITE
messages. If the called IP party does not
answer the call within this user-defined
interval, the device disconnects the
session. The device starts the timeout
count upon receipt of a SIP 180 Ringing
response from the called party. If no other
SIP response (for example, 200 OK) is
received thereafter within this timeout, the
call is released.
The valid range is 0 to 3600 seconds. the
default is 600.
Defines the maximum number of concurrent
SIP SUBSCRIBE sessions permitted on
the device.
Profiles. If this