Obtaining License Key For Initial Activation - AudioCodes Mediant 4000 SBC User Manual

CHAPTER 38 License Key

Obtaining License Key for Initial Activation

The following procedure describes how to obtain and activate your License Key for initial activation
of your device.
●
●
➢
To obtain and activate your License Key for initial activation:
1. Make a note of the device's Serial Number (fingerprint). The Serial Number uniquely identifies
the software installation. The Serial Number is displayed in the 'Serial Number' field on the
Device Information page (see
2. Activate your product through AudioCodes Web-based License Activation tool:
a. Go to http://www.audiocodes.com/swactivation:
b. Fill in the following information:
◆
License activation is intended only for first-time software activation upon product
purchase (or if your License Key is "lost", due to whatever reason). For subsequent
software feature upgrades, the License Key file is e-mailed to you after your
Purchase Order has been processed; and no activation is required.
For 1+1 High-Availability orders, each device (active and redundant) has its own
Serial Number, Product Key and License Key. Therefore, the instructions in this
section must be repeated for each device.
Viewing Device
Product Key: The Product Key identifies your specific device purchase for the
purpose of subsequent communication with AudioCodes (for example, for support and
software upgrades). The Product Key is provided in the Order Confirmation e-mail
sent to you by AudioCodes upon your purchase, as shown in the example below:
Information).
- 673 -
Mediant 4000 SBC | User's Manual