Volkswagen Passat 1995 Official Factory Repair Manual page 1775

VAG 1551 Scan Tool (ST), connecting and selecting 'Engine Electronics' address word 01
Rapid data transfer
Select function XX
Rapid data transfer
DTC Memory is erased
Rapid data transfer
Select function XX
Read Measuring Value Block
Input display group number XXX
Read Measuring Value Block
1 2 3 4
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU07....
HELP
HELP
HELP
103
Work step: 3
Indicated on display
- Press buttons -0- and -5- to select "Erase DTC
Memory" function 05 and press -Q- button to
confirm input.
Indicated on display
- Press
button.
Work step: 4
- Start engine and run at idle speed.
Work step: 5
Indicated on display
- Press buttons -0- and -8- to select "Read
Measuring Value Block" function 08 and press -
Q- button to confirm input.
Indicated on display
- Press buttons -1-, -0- and -3- to input display
group 103 and press -Q- button to confirm
input.
Indicated on display (1-4 = display fields)
- Increase engine speed to 3000-3500 RPM and
check specifications after 60 seconds.
Page 30 of 77
01-36
12/6/2004