Volkswagen Passat 1995 Official Factory Repair Manual page 1985

Multiport fuel injection and ignition system
Read Measuring Value Block
1 2 3 4
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU07.28.1
Indicated on display (1-4 = display fields)
45
Note:
The check must be carried out during a test drive as the knock
control is only active with an engine load exceeding 3 ms.
- Carry out a test drive and observe the knock control
specifications on display (second technician necessary).
Display group 045: Knock control
Display
Indicated
Working
range
Specification
- Read the readiness code
been erased, verify repair via appropriate display group
Page 01-33
- Press
- Press buttons -0- and -6- to select "End Output" function 06
and press -Q- button to confirm input.
Display fields
1
xx.xx xx.xx
Ignition Ignition
angle angle
correction correction
cylinder cylinder
1
0.0 - 0.0 -
15.0 15.0
0.0 - 0.0 -
12.0 12.0
If specification is not attained
evaluating display group 045 and 046
Page 01-31
, Readiness code, creating.
button.
2 3
xx.xx xx.xx
Ignition
angle
correction correction
cylinder
2 3
0.0 -
15.0
0.0 -
12.0
Page 28-21
. If DTC memory has
Page 20 of 31
28-20
4
Ignition
angle
cylinder
4
0.0 -
15.0
0.0 -
12.0
,
12/6/2004