Motronic fuel injection and ignition system
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU08.24.1
Page 15 of 26
Throttle valve control
module, removing and
installing
1 - Upper part of intake
manifold
First tighten at lower
section of intake
manifold, then tighten
both rear supports
(item 13 and item 4 )
2 - Wiring channel
3 - 10 Nm
4 - Right rear support
Between upper part of
intake manifold and
cylinder head
5 - 25 Nm
6 - Vacuum hose
Check for secure fitting
From Secondary Air
Injection (AIR)
Solenoid Valve -N112-
Page 26-14
24-15
, item 7
12/6/2004