Ignition, servicing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
- To tighten toothed drive belt, turn
tensioner with pin wrench (e.g. Matra
V159) in direction shown (arrow).
Drive belt is correctly tensioned if it can
be turned 90 with thumb and
forefinger halfway between camshaft
and intermediate shaft sprockets.
- Tighten tensioner lock nut.
Tightening torque: 45 Nm
- Rotate crankshaft two full turns and
check adjustment.
- Check distributor housing and rotor
arm markings.
- Install upper toothed belt protective
cover.
- Before installing, clean distributor
cap and check for cracks and signs
of carbon tracking, replace if
necessary.
Page 17 of 31
28-15
6/12/2004