Engine components,checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU08.24.2
Range A displays resistance values for the
temperature range of 0 to 50 C, range B displays
resistance values for the temperature range of 50 to
100 C.
Read-out examples:
30 C is in range A and corresponds to a
resistance of 1.5 to 2.0 k
80 C is in range B and corresponds to a
resistance of 275 to 375
If specified value is not obtained:
- Replace Intake Air Temperature (IAT) Sensor -
G72-
Page 24-14
- Erase DTC memory of Engine Control Module
(ECM)
Page ST-25
Reset/erase diagnostic data.
- Generate readiness code
If no malfunctions are detected in the wires and the
resistance values are OK:
- Replace Motronic Engine Control Module (ECM) -
J220-
Page 24-101
Page 35 of 59
, item 16 .
, Diagnostic mode 4:
Page ST-50
.
.
24-61
12/6/2004