Volkswagen Passat 1995 Official Factory Repair Manual page 1416

Ignition, servicing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
- Turn intermediate shaft sprocket with
toothed drive belt in direction shown
(arrow), until rotor arm aligns with
markings for no. 1 cylinder on
distributor housing (toothed drive belt
slides over crankshaft sprocket).
Mark on distributor must align with
mark on rotor arm or camshaft
position sensor cover.
- Place toothed drive belt on belt
tensioner and camshaft sprocket.
Note:
For easier installation of the toothed
drive belt, loosen belt tensioner lock nut
only approx. one thread.
Page 16 of 31
28-14
6/12/2004