Volkswagen Passat 1995 Official Factory Repair Manual page 1311

Components of engine, checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
If indication remains at 141.0 C:
- End diagnosis and switch ignition off.
- Check wires according to wiring diagram
Page 24-58 .
Checking wiring
- Connect test box to control module wiring
harness Page ST-11
wiring test.
- Check wires between test box and 2-pin
connector for open circuit according to wiring
diagram.
Terminal 1 + socket 36
Terminal 2 + socket 33
- Wire resistance: max. 1.5
- Check wires for short circuit to each other, to
vehicle Ground (GND) and to B+.
Specified value:
Page 34 of 62
24-58
, connect test box for
6/12/2004