Volkswagen Passat 1995 Official Factory Repair Manual page 2055

Accelerator Pedal (AP) cable, adjusting
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU08.20.3
- Connect hand multimeter with adapter cables to
Kick Down Switch -F8-.
- Measure resistance at switch.
Specified value:
- Move accelerator pedal slowly in direction of Wide
Open Throttle (WOT).
Shortly after kickdown point, resistance must
drop to 0 (continuity).
For this, accelerator pedal must be slightly
before stop.
- Release accelerator pedal.
(no continuity)
Page 4 of 4
20-53
12/6/2004