Volkswagen Passat 1995 Official Factory Repair Manual page 1824

VAG 1551 Scan Tool (ST), connecting and selecting 'CARB/OBD II' address word 33
Rapid data transfer
33 - OBD II
OBD II Scan Tool
Select mode 1.. 2.. 3.. 4.. 5.. 6.. 7..
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU07.01.3
Q
Display will appear as shown
- Press Q button to confirm input.
Display will appear as shown
The following modes can be selected:
Mode Current data
1
Mode Freeze frame data
2 Page 01-87
Mode DTC memory
3
Mode Clear DTC memory
4
Mode Oxygen sensor signal (B1-S1)
5 98
Mode Transfer measured values. Measured
6 values that are not being monitoring will be
output.
Mode Interrogate DTC memory. Malfunctions
7 which have not switched ON the MIL can be
interrogated.
Note:
When a mode is selected, the control module replies
with a 4 on the display in front of the mode selected.
Example: mode 2 will be indicated in the display with
mode 42.
Page 2 of 17
Page 01-86
Page 01-95 or
Page 01-96
Page 01-97
Page 01-
01-85
12/6/2004