Volkswagen Passat 1995 Official Factory Repair Manual page 1911

Multiport fuel injection and ignition system
Rapid data transfer
Select function XX
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU07.24.1
HELP
- Check wiring at 8-pin connector for short circuit to
each other.
Terminal 7 and test box socket 10
Terminal 7 and test box socket 41
Terminal 4 and test box socket 33
Specification: ohms
- Reconnect connector.
If no wiring malfunction is detected:
- Replace Engine Control Module (ECM) -J220-.
- Read the readiness code
memory has been erased, verify repair via
appropriate display group
Readiness code, creating.
Checking Closed Throttle Position (CTP) switch
- Connect VAG 1551/1552 scan tool and select
"Engine Electronics" address word 01
7 . When doing this the engine must be running at
idle speed.
Indicated on display
- Press buttons -0- and -8- to select "Read
Measuring Value Block" function 08 and press -Q-
button to confirm input.
Page 72 of 126
W)
Page 01-31 . If DTC
Page 01-33 ,
Page 01-
12/6/2004
24-70