Volkswagen Passat 1995 Official Factory Repair Manual page 2150

Function tests
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU08.24.3
- Check wires between test box and 4-pin connector
to Engine Control Module (ECM) for open circuit
according to wiring diagram.
Terminal 3 + socket 58
Terminal 4 + socket 13
Wire resistance: max. 1.5
- Check wires for short circuit to B+ and to Ground
(GND).
Specified value:
If no malfunctions are found in wires:
- Replace Oxygen Sensor (O2S) 2 Bank 1 Behind
Three Way Catalytic Converter (TWC) -G108-
Page 24-8 , item 5 .
- Erase DTC memory of Engine Control Module
(ECM) Page ST-25
Reset/erase diagnostic data.
- Generate readiness code
Page 10 of 10
, Diagnostic mode 4:
Page ST-50 .
24-95
12/6/2004