Volkswagen Passat 1995 Official Factory Repair Manual page 1490

Electrical components of transmission control, removing and installing, checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Multi-Function Transmission Range (TR)
Switch, checking
Recommended special tools and equipment
V.A.G1526 Multimeter or V.A.G1715
multimeter
V.A.G1594 Connector test kit
Wiring diagram
Test requirements
Selector lever must be in -P- position.
Ground (GND) connections to transmission
must be OK.
Ignition switched off.
Checking wiring
- Connect test box to control module wiring
harness Page ST-11
wiring test.
- Disconnect 8-pin connector from Multi-Function
Transmission Range (TR) Switch -F125-.
Page 12 of 27
38-10
, connect test box for
6/12/2004