Volkswagen Passat 1995 Official Factory Repair Manual page 1418

Ignition, servicing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Camshaft Position (CMP) sensor,
checking
Recommended special tools and
equipment
V.A.G1526 Multimeter
V.A.G1594 Connector test kit
V.A.G1527 Voltage test lamp
Test requirements
The respective fuses of Motronic
Engine Control Module (ECM) -
J220- must be OK:
Electrical Wiring Diagrams,
Troubleshooting & Component
Locations
Battery voltage must be at least
11.5 volts.
All electrical consumers such as
lights and rear window defroster
must be switched off.
Parking brake must be engaged or
else daylight driving lights will be
switched on.
For vehicles with automatic
transmission, selector lever must be
in -P-.
Page 18 of 31
28-16
6/12/2004