Volkswagen Passat 1995 Official Factory Repair Manual page 1829

VAG 1551 Scan Tool (ST), connecting and selecting 'CARB/OBD II' address word 33
Mode 41 PID 3 Module 10
Fuel System xxx1xxxx xxxxxxxx
Mode 41 PID 4 Module 10
Calculated load value
Mode 41 PID 5 Module 10
Engine Coolant Temp.
Mode 41 PID 5 Module 1A
Coolant temp.
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU07.01.3
2 %
C
C
- Press
button to display any additional
diagnostic data.
PID3: Injection status
When the 4th position from the left is 1, the
injection status is recognized as available
- Press
button.
PID4: Calculated load value %
Specification at idle approx.: 2%
- Press
button.
PID5: Engine coolant temperature C
Indicates the current engine coolant temperature.
Specification for engine at normal operating
temperature: 80 to 105 C (176 to 221 F)
- Press
button.
PID5: Coolant temperature C
Indicates the current ATF temperature.
When the ATF specification is above 140 C
(284 F) with engine at normal operating
temperature, 80 to 105 C (176 to 221 F) a
DTC will be stored.
Page 7 of 17
01-90
12/6/2004