Volkswagen Passat 1995 Official Factory Repair Manual page 1709

Motronic Fuel Injection and Ignition system, component layout
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
- Check throttle angle (in closed throttle position),
in display zone 3.
Specification: 9...19
- Slowly open throttle fully and observe angle
displayed in display zone 3. The observed value
must increase uniformly over the complete
range.
- Observe throttle angle at Wide Open Throttle in
display zone 3.
Specification: 90...101
- Press
button.
- Select Function 06 "End output" and confirm
with Q.
If the specifications are not obtained or do not
increase uniformly:
- Perform electrical check, test step Fig. 21
page 01-42 (Fuel and Ignition), if necessary
replace Throttle Position sensor (G69)
24-18 , item 7 .
Page 46 of 59
24-33
Page
6/12/2004