Additional signals, checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU08.24.5
If no malfunctions are found in the wires and
there was voltage between terminals 1 + 3:
- Replace Speedometer Vehicle Speed Sensor
(VSS) -G22-.
- Erase DTC memory of Engine Control Module
(ECM)
Page ST-25
Reset/erase diagnostic data.
- Generate readiness code
Page 6 of 6
, Diagnostic mode 4:
Page ST-50
.
12/6/2004
24-107