Volkswagen Passat 1995 Official Factory Repair Manual page 1751

VAG 1551 Scan Tool (ST), connecting and selecting 'Engine Electronics' address word 01
Rapid data transfer
Select function XX
X DTC recognized
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU07....
HELP
Check DTC Memory (function 02)
Special tools, testers and auxiliary items
VAG 1551/1552 scan tool with VAG 1551/3
adapter cable
Work sequence
- Connect VAG 1551/1552 scan tool and select
"Engine Electronics" address word 01
01-7 . When doing this the engine must be
running at idle speed.
Note:
If engine does not start, operate starter for
approx. 6 seconds and then do not switch
ignition off.
- Switch printer on with PRINT button (warning
lamp in button lights up).
Indicated on display
- Press buttons -0- and -2- to select "Check DTC
Memory" function 02 and press -Q- button to
confirm input.
The number of malfunctions stored or "No DTC
recognized" will be shown on the display.
Note:
If something different is indicated on the display:
VAG 1551 scan tool operating instructions
Page 6 of 77
01-12
Page
12/6/2004