Volkswagen Passat 1995 Official Factory Repair Manual page 1718

Motronic Fuel Injection and Ignition system, component layout
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
- Remove wiring to fuel injectors from wiring
guide.
- Remove wiring guide.
- Remove fuel injectors complete with fuel rail.
Note:
If the fuel injectors are seated too securely in the
intake manifold lower section carefully pry out,
using a 16 mm open end wrench under the
Throttle body.
Installing
Installation is the reverse of the removal
procedure.
Note:
When installing fuel injectors, ensure that O-rings
are not/will not be damaged. To facilitate
installation, moisten 0- rings lightly with oil.
- Adjusting throttle cable:
Repair Manual, 2.8 Liter VR6 2V Engine
Mechanical, Engine Code(s): AAA, Repair Group
20
Page 55 of 59
24-42
6/12/2004