VAG 1551 Scan Tool (ST), connecting and selecting 'Engine Electronics' address word 01
Rapid data transfer
Select function XX
Basic Setting
Input display group number XXX
System in Basic Setting
1 2 3 4
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU07....
HELP
HELP
180
Work step: 14
- Read the readiness code
- If the readiness code is not OK, perform optional
work steps 15 through 22.
Work step: 15
Diagnosis: Vehicle Speed Sensor (VSS)
Indicated on display
- Press buttons -0- and -4- to select "Basic
Setting" function 04 and press -Q- button to
confirm input.
Indicated on display
- Press buttons -1-, -8- and -0- to input display
group 180 and press -Q- button to confirm input.
Indicated on display: (1-4
- Test drive according to the following special
requirements:
Select drive range 2 (automatic) or 3rd gear
(manual)
Engine speed above 3500 and 5 seconds ...
... then release accelerator pedal for 3 seconds.
After 3 seconds, vehicle speed must still be at
least 20 km/h (13 mph) and have been in
deceleration fuel cut-off for a minimum of 2
secs.
Page 48 of 77
01-54
Page 01-31
display fields)
12/6/2004