Volkswagen Passat 1995 Official Factory Repair Manual page 1641

Output Diagnostic Test Mode (DTM), initiating
Output Diagnostic Test Mode
Injector cylinder 1 -N30
Output Diagnostic Test Mode
Idle Air Control valve -N71
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Activate Cyl. 1 Fuel Injector (N30):
- Confirm input with Q button.
Display will appear as shown:
- Open Throttle to Wide Open position
and close again. Cyl. 1 Fuel Injector
must click
To activate the Fuel Injectors for Cyls. 2
through 6 in each case:
- Open Throttle to wide open position
again and close.
To skip individual Fuel Injector tests:
- Press
button.
If one or more Fuel Injectors do not
click:
- Continue Output DTM to the end.
- Switch off ignition.
- Check Fuel Injector activation
(resistance and current supply),
Page 24-43 .
Activate Idle Air Control valve (N71):
- Press
button.
Display will appear as shown:
Page 3 of 9
01-34
6/12/2004