Volkswagen Passat 1995 Official Factory Repair Manual page 2219

Transmission control electrical components, removing and installing, checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU08.38.1
Fig. 3 Transmission Vehicle Speed Sensor
(VSS) -G38-, removing and installing
Component location: Transmission Vehicle Speed
Sensor (VSS) (arrow) is located on top of
transmission.
Recommended special tools and equipment
V.A.G 1331 torque wrench (5 to 50 Nm)
Removing
- Disconnect white connector from Transmission
Vehicle Speed Sensor (VSS) -G38-.
- Remove bolt and sensor.
- Replace O-ring.
Installing
Installation is performed in reverse order of removal.
- Tighten bolt to 10 Nm.
Page 6 of 26
38-6
12/6/2004