Volkswagen Passat 1995 Official Factory Repair Manual page 2099

Engine components,checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU08.24.2
Checking voltage supply and wiring to
control module
- Connect multimeter to terminals 3 + 7 of connector
for voltage measurement.
- Switch ignition on.
Specified value: at least 9.0 V
- Switch ignition off.
- Connect multimeter to terminals 4 + 7 of connector
for voltage measurement.
- Switch ignition on.
Specified value: at least 4.5 V
- Switch ignition off.
If specified values are not obtained:
- Connect test box to control module wiring harness
Page ST-10 , connect test box for wiring test.
Page 18 of 59
24-44
12/6/2004