Volkswagen Passat 1995 Official Factory Repair Manual page 1426

Ignition, servicing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
- Repeat test.
If specified values are not obtained again:
- Replace Ignition Coil -N152-
7 .
- Erase DTC memory of Engine Control Module
(ECM) Page ST-26
Reset/erase diagnostic data.
- Generate readiness code
If specified values are obtained:
- Check ignition coil power output stage
28-25 .
Page 26 of 31
Page 28-4 , item
, Diagnostic mode 4:
Page ST-52 .
Page
6/12/2004
28-24