Volkswagen Passat 1995 Official Factory Repair Manual page 2107

Engine components,checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU08.24.2
If indication remains at approx. 141.0 C:
- End diagnosis and switch ignition off.
- Check wires according to wiring diagram
Page 24-52 .
Checking wiring
- Connect test box to control module wiring
harness Page ST-10
wiring test.
- Check wires between test box and 2-pin connector
to Engine Control Module (ECM) for open circuit
according to wiring diagram.
Terminal 1 + socket 14
Terminal 2 + socket 33
Wire resistance: max. 1.5
- Check wires for short circuit to each other, to
vehicle Ground (GND) and to B+.
Specified value:
Page 26 of 59
, connect test box for
12/6/2004
24-52