Volkswagen Passat 1995 Official Factory Repair Manual page 2221

Transmission control electrical components, removing and installing, checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU08.38.1
Fig. 5 Multi-Function Transmission Range
(TR) Switch -F125-, removing and
installing
Component location: Multi-function switch is located
at rear on transmission.
Recommended special tools and equipment
V.A.G 1331 torque wrench (5 to 50 Nm)
Removing
- Disconnect 8-pin connector from multi-function
switch.
- Remove bolt and retainer.
- Remove Multi-Function Transmission Range (TR)
Switch.
- Replace O-ring.
Installing
Installation is performed in reverse order of removal.
- Tighten bolt to 10 Nm.
Page 8 of 26
38-8
12/6/2004