Volkswagen Passat 1995 Official Factory Repair Manual page 1914

Multiport fuel injection and ignition system
Rapid data transfer
Select function XX
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.FU07.24.1
HELP
- Check wiring at 8-pin connector for short circuit
to each other.
Terminal 7 and test box socket 10
Specification: ohms
- Reconnect connector.
If no wiring malfunction is detected:
- Replace throttle valve control module -J338-.
- Read the readiness code
memory has been erased, verify repair via
appropriate display group
Readiness code, creating.
Checking Throttle Position (TP) actuator and
Throttle Position (TP) sensor
Test conditions
Coolant temperature at least 80 C (176 F)
Test sequence
- Connect VAG 1551/1552 scan tool and select
"Engine Electronics" address word 01
01-7 . When doing this the engine must be
running at idle speed.
Indicated on display
- Press buttons -0- and -8- to select "Read
Measuring Value Block" function 08 and press -Q-
button to confirm input.
Page 75 of 126
W)
Page 01-31 . If DTC
Page 01-33 ,
Page
12/6/2004
24-73