Volkswagen Passat 1995 Official Factory Repair Manual page 1415

Ignition, servicing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
- Install distributor. Pins on distributor
must point toward mounting bolt
threaded hole (arrow).
Note:
When installing, turn rotor arm slightly
right of the distributor marking. When
inserting, rotor arm will turn back to the
marking.
Mark on distributor must align with
mark on rotor arm or camshaft
position sensor cover.
- Tighten distributor mounting bolt.
Tightening torque: 25 Nm
If not able to align markings:
- Loosen belt tensioner and take
toothed drive belt off camshaft
sprocket.
Page 15 of 31
28-13
6/12/2004