Volkswagen Passat 1995 Official Factory Repair Manual page 1497

Electrical components of transmission control, removing and installing, checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Checking wiring
- Connect test box to control module wiring
harness Page ST-11
wiring test.
- Disconnect black connector from Vehicle Speed
Sensor (VSS) -G68-.
- Check wires between test box and 2-pin
connector to Transmission Control Module
(TCM) for open circuit according to wiring
diagram.
Terminal 1 + socket 65
Terminal 2 + socket 20
Wire resistance: max. 1.5
- Check wires for short circuit to each other, to
vehicle Ground (GND) and to B+.
Specified value:
Page 19 of 27
38-17
, connect test box for
6/12/2004